Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Introduction
Dear customer,
Thank you for purchasing this product.
This product complies with statutory national and European regulations.
For safety reasons, always follow the instructions in this manual.
These operating instructions are part of this product. They contain important information on setting up and
using the product. Never give the product to a third party without these instructions, and keep them in a
safe place for reference.
If there are any technical questions, please contact:
International:
www.conrad.com/contact
United Kingdom: www.conrad-electronic.co.uk/contact
2. Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric
shock.
The exclamation mark indicates specific risks associated with handling, function and use.
The "arrow" symbol indicates special tips and information on how to use the product.
The product may be installed and used only in dry, enclosed locations indoors. It must not become damp
or wet, as this may result in a fatal electric shock!
This symbol indicates that this product is built according to protection class II. It is equipped with reinforced
or dual insulation between the mains circuit and the output voltage.
The device was constructed according to protection class III. Protection class III includes electrical products
with a low voltage power supply (< 50 Volts) using a safety transformer or batteries/rechargeable batteries/
solar power etc. Products in protection class III have no connection for protective insulation - they must not
be connected to the protective earth.
This symbol indicates that a safety transformer is built into the product according to the VDE 0551
guidelines.
Independent converter. The converter is designed to operate lights without additional covers or safety
measures.
This symbol reminds you to read the operating instructions included with the product.
13
Advertenties
Hoofdstukken
Inhoudsopgave
