Stappen
1. Align and place the camera module into the slot on the display back cover.
2. Connect the camera module cable to the connector on the camera module.
3. Adhere the tape to secure the camera cable to the camera.
Vervolgstappen
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
WLAN
card.
5. Install the
4G WWAN card
6. Install the
base
cover.
7. Install the
SIM
card.
8. Follow the procedure in
Beeldschermscharnieren
Removing the display hinges
WAARSCHUWING:
The information in this section is intended for authorized service technicians only.
Vereisten
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
base
cover.
4. Remove the
4G WWAN card
5. Remove the
WLAN
card.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
8. Remove the
display
panel.
Over deze taak
The following images indicate the location of the display hinges and provide a visual representation of the removal procedure.
112
FRU's (op locatie te vervangen onderdelen) verwijderen en installeren
or
5G WWAN
card, as applicable.
After working inside your
computer.
Before working inside your
or
5G WWAN
card, as applicable.
computer.