Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1.
Operation panel
2.
Housing
3.
Vertical blinds
4.
Air outlet
5.
Water level glass
6.
Swivel wheels
7.
Handle
8.
Air inlet with dust
filter and
evaporation
element
9.
Lock button
10. Water tank
The Coolstar 3.5 evaporates water with heat that is removed from the room and
sends the cool, humid air back into the room: a process that can be compared to
wind blowing across water.
The Coolstar 3.5 has the following functions:
Ventilation (3 power settings)
-
Ventilation and cooling (3 power settings)
-
Rotation
-
Installation and preparation
Do not start using the air cooler until:
- all packaging is removed and placed away from children.
- all safety instructions have been observed.
- the air cooler or the plug is NOT plugged into the socket.
Turn the lock button (9) open and pull the water reservoir roughly 15 cm
backwards and fill with clean cold water; Fill the reservoir above the "MIN"- but
below the "MAX" level. Ensure that the plug does not get wet or fall into the
water tank. Never use the cooling function without sufficient water in the water
tank.
If you require extra cooling, you could add frozen ice packs or ice cubes in the
water reservoir (not included).
If you wish to use the cool function, ensure there is sufficient water in the
reservoir.
If you have not used the unit for some time, refresh any remaining water.
Put the air cooler in the correct position.
Always unplug the power cord when you pour water in or out of the tank!
26
Advertenties
Inhoudsopgave
