Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
30
www.aeg.com
German de-
grees (°dH)
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
If you use multi-tablets containing salt
and the hardness of your water is lower
than 21dH, you can set the lowest water
softener level. It deactivates the salt refill
indicator.
If you use standard detergent or multi-
tablets without salt, set the proper
water hardness level to keep the salt
refill indicator active.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
change the setting.
French degrees
(°fH)
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
and
,
start to flash and the display is
.
go off.
continues to
= level 5.
again and again to
mmol/l
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser
and no rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
until
and
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
and
the indicators
blank.
2. Press
• The indicators
• The indicator
flash.
Clarke de-
Water softener lev-
grees
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
and
,
start to flash and the display is
.
go off.
continues to
el
8
7
6
1)
5
4
3
2
2)
1
until
and
and
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
