Descaling; Switching-Off The Descaling Indicator Light - Animo M Series Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor M Series:
- Gebruiksaanwijzing (21 pagina's) ,
- Gebruiksaanwijzing (29 pagina's) ,
- Gebruiksaanwijzing (24 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CAUTION
•
Stay close to the appliance when performing maintenance.
•
It is advisable to wear safety glasses and protective gloves when descaling the
appliance.
•
Flush the appliance at least two times after descaling it.
•
Wash your hands thoroughly after descaling the appliance.
6.2
Descaling
Scale deposits are left in the heating system when the appliance is used. The amount of
scaling depends on the hardness of the water being used. The appliance is fitted with
a descale indicator light (5.2), which lights up when the heating system has processed
a certain quantity of water and has to be descaled. The appliance continues to work so
that it can be descaled when it is not being used.
NOTICE
•
Observe the descaling intervals indicated by the descale indicator light. Overdue
maintenance to the heating system can result in high repair costs and annulment of the
guarantee.
1.
Before descaling the appliance, carefully read the instructions for use on the
descaling agent. We advise you to use the tried and tested Animo descaling agent.
2.
Slide an empty basket filter (3) and place an empty jug under it.
3.
Remove the cap (8) and place the funnel (supplied) into the descaling opening.
4.
Dissolve one 50 gram sachet of Animo descaling agent in 0.5 litre of warm water
(approx. 60-70˚C).
5.
Carefully pour half of the solution into the descaling opening (8) using the funnel
6.
Switch on the appliance using the switch (1). Select 2 cups using the selection
button (5.4) and press the start/stop button (5.5). The solution will now run through
the heating system and discharge into the jug.
7.
Wait until the 'coffee ready' signal sounds. The solution will now react with the
deposit in the heating system.
8.
After the waiting time, repeat points 5 and 6.
9.
Wash away the solution in the jug once the filter has finished dripping.
10. Remove the funnel and replace the cap.
11. After descaling the appliance, flush the system by following the coffee making
procedure twice but without using filter paper or coffee. Remember to empty the jug
in the mean time.
12. Switch off the appliance and thoroughly clean the basket filter and the jug.
13. The appliance is now ready for use.
6.2.1 Switching-off the descale indicator light
1.
Press the selection button (5.4) for 6 seconds; the descale indicator light (5.2)
will go out.
2.
The control system resumes registering the number of brewing processes.
GB
35
M-LINE
2015/02 Rev. 4.0
Advertenties
Hoofdstukken
Inhoudsopgave
