Advertenties
Beschikbare talen
Beschikbare talen
Before first use
1) Remove the iron from the packaging.
RISK OF SUFFOCATION!
►
Plastic bags may pose a risk. To avoid the risk of asphyxiation,
keep plastic bags out of the reach of toddlers and small children.
2) Open the water tank filler opening
water (See the section Filling the water tank).
3) Set the correct voltage using the voltage switch
example, use a thin pin or a straightened paper clip to do this.
―
Slide the voltage switch
220 – 240 V (e.g. for Europe/Switzerland).
―
Slide the voltage switch
100 – 127 V (e.g. for USA/Japan).
4) Insert the plug into a mains power socket supplying the voltage
you have set.
5) Set the temperature control
6) Heat the iron up for several minutes at the highest setting.
7)
If clicked in: press the steam switch
and protrudes beyond the appliance surface. Steam will
come out of the sole of the iron
the iron horizontally.
8) Then iron over a piece of scrap fabric to remove any production
residues that may remain on the ironing sole
9)
Press the steam switch
The steam discharge then stops.
SDBR 420 A1
and fill the water tank with
to the right to set a voltage of
to the left to set a voltage of
to "MAX"
.
continuously if you hold
again so that it re-engages.
GB │ IE
. You can, for
so that it releases
.
│
29
■
Advertenties
