Maintenance And Servicing; Maintenance And Cleaning; Transport - Bosch Professional GSR 12V-35 FC Oorspronkelijke Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor Professional GSR 12V-35 FC:
- Oorspronkelijke gebruiksaanwijzing (227 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
20 | English
Gear se-
Speed
Torque
lector
switch (3)
position
2
High
Low
Setting the Operating Mode
Drilling
Set the torque presetting ring (2) to the
"drilling" symbol to achieve the maximum
torque for drilling and screwdriving.
Screwdriving
Set the torque presetting ring (2) to the re-
quired torque setting.
Switching on/off
To start the power tool, press and hold the on/off switch
(7).
The worklight (9) lights up when the on/off switch (7) is
lightly or fully pressed, allowing the work area to be illumin-
ated in poor lighting conditions.
To switch off the power tool, release the on/off switch (7).
Adjusting the speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch (7) to varying extents.
A light pressure on the on/off switch (7) results in a low rota-
tional speed. Increased pressure on the switch causes an in-
crease in speed.
Practical advice
Only apply the power tool to the screw when the tool
u
is switched off. Rotating application tools can slip off.
After working at a low speed for an extended period, you
should operate the power tool at the maximum speed for ap-
proximately three minutes without load to cool it down.
When drilling into metal, only use sharpened HSS drills
(HSS = high-speed steel) which are in perfect condition. The
Bosch accessory range guarantees appropriate quality.
Before screwing larger, longer screws into hard materials, it
is advisable to pre-drill a pilot hole with the core diameter of
the thread to approx. 2/3 of the screw length.
Belt clip (see figure H)
You can use the belt clip (18) to hang the power tool on a
belt, for example. You then have both hands free and the
power tool is always within easy reach.
Bit holder (see figure I)
You can place screwdriver bits in the bit holder (19) for stor-
age.
1 609 92A 9UL | (09.10.2024)
Colour clip (see figure J)
Application range
The colour clip (20) can only be used if the belt clip (18) or
bit holder (19) are not fitted.
Maintenance and servicing
For light-duty ap-
plications:
Maintenance and Cleaning
e.g. drilling and
screwdriving with
Before carrying out any work on the power tool (e.g.
u
small diameters
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When the batteries are shipped by third parties (e.g. air
transport or forwarding agency), special requirements on
packaging and labelling (e.g. ADR regulations) must be met.
A dangerous goods expert must be consulted when prepar-
ing the items for shipping.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Bosch Power Tools
Advertenties
