Advertenties
Beschikbare talen
Beschikbare talen
Operation
• Put the hose connection in the machine; if
necessary, turn it a bit till the narrow part is in
total in the machine. Then turn it as far as
possible clockwise.
• After this, connect the accessories you wish
with a twisting force, see picture.
• You can adjust the telescope tube by pushing
the sliding block 2A down and
tracking/pushing the lowest tube to the
length you wish.
• Insert the plug into the socket.
• Press the switch on/off to I to turn on.
• If necessary, due to the surface and task, the hair or rubber
strips can be removed from the suction mouth. In order to
do so, slide the discs on the suction mouth outwards, take
the strip holder from the suction mouth, slide the excess
strip out and replace the holder.
• For the vacuuming of liquid the motor (which is situated in
the cap) is provided with a floater that is hanging under the
motor, in the barrel. For the vacuuming of dry dirt and dust
the motor is provided with a filter that the floater surrounds
and in that way prevents that dust enters the mechanic
system. Do you want to vacuum liquid, remove than the
filter by opening the locking blocks, to lift and turn the cap,
to turn the lid from the filter (see image), and to slide the filter from the floaters frame.
Now you can remove the filter. Bring the cap back in its position and close the blocks.
Place the supplied black filter around the float.
Be carefull!
• Never vacuum dust without the filter around the floater!
• Never vacuum liquid with the filter around the floater!
Socket
In order to use the socket, you must lift the lid and insert the plug into the socket. Then
use the ON/OFF switch to select the appropriate setting:
I = device works, power from socket
O = device off, power to socket (max. 2000W)
II = Power to socket, connected device will work.
After 5-8 seconds the vacuum cleaner will start. If the connected device is switched
off, the vacuum cleaner will also stop after 5-8 seconds.
13
Advertenties
