Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8.4 Responding to a CO alarm
■
The following actions are only suggestions only. The actual circumstances
may require different protocols.
■
If in any doubt, consult a qualified professional to develop a suitable action
plan.
If the carbon monoxide detector/alarm sounds, it is crucial to take immediate and effective
action to ensure your safety and the safety of others. Follow these steps:
1. Immediately close gas valves (if applicable).
2. Open windows to maximize ventilation.
■
Open all windows and doors to allow fresh air to circulate and reduce the concentration
of CO indoors.
3. Evacuate the Premises.
■
Do not ignore the alarm. Assume that the alarm indicates dangerous levels of carbon
monoxide.
■
Immediately evacuate all occupants, including pets.
■
Move to a location with fresh air, preferably outside the building.
4. Call Emergency Services.
■
Once you are in a safe location, call emergency services to report the alarm and the po-
tential CO leak.
■
Do not re-enter the building until it has been declared safe by professionals.
5. Check the CO detector.
■
If the alarm was found to be false after a professional assessment, ensure the CO de-
tector is correctly installed and is working correctly.
8.5 Product status
Display
Description
Preheating
■
Product preheats dur-
ing startup.
■
LCD will countdown
from 120 seconds.
■
Green indicator: 1x
flash every 2 secs.
Normal operation
■
Product is in normal
operation.
■
Green indicator: 1x
flash every 40 secs.
Alarm mode
■
Beeper sounds 4x
continuously.
■
Red lights flash.
■
Screen shows real-
time carbon monoxide
concentration levels.
Overrange
■
Carbon monoxide
levels have exceeded
the measurable
range.
Wi-Fi pairing
■
Product is open for
Wi-Fi paring.
■
Connection to Wi-Fi
network in progress.
■
See section:
Product
to app pairing [} 7]
7
Display
Description
Test mode
■
LCD display: 000.
■
Indicators cycle
through colours:
red → green → yel-
low → red.
■
Beeper sounds 4x.
Sensor fault
See section:
Troubleshooting
[} 8].
■
Yellow indicator: 2x
flash every 40 secs.
■
Beeper sounds 2x
every 40 secs.
■
Fault appears on
the display.
Battery low voltage
■
Yellow indicator: 1x
flash every 40 secs.
■
Beeper sound 1x
every 40 secs.
■
Battery indicator
shows: empty.
■
Replace the battery.
End-of-life
Product has reached
the end of service life and
can no longer be used.
■
LCD shows: END.
■
Yellow indicator: ON.
■
Beeper sounds 3x
every 60 secs.
Product is connected to
the Wi-Fi network.
8.6 End of service life
When the end of service light indicator [Yellow: Fault] lights up, remove the
product from use and replace it with a new one.
■
The service life of this product is approximately 10 years under normal conditions. Make
a note of the installation date.
■
Regular cleaning and maintenance will help prolong use. See section
maintenance [} 8]
.
9 Carbon monoxide (CO) exposure levels and health effects
Important:
The information provided in this table is for reference purposes only and should not be
used as a substitute for professional medical advice or emergency response guidelines.
CO levels
Description
200 ppm
Maximum concentration a healthy adult can tolerate over 8 hours.
400 ppm
Mild headache, feeling weak in 2-3 hours.
800 ppm
Dizziness, nausea, and cramps within 45 minutes, loss of sensa-
tions in 2 hours, death in 2-3 hours.
1600 ppm
Headache, dizziness, nausea within 20 minutes, death in 1 hour.
3200 ppm
Headache, dizziness, nausea within 5-10 minutes, death in 25-30
minutes.
6400 ppm
Headache, dizziness, nausea within 1-2 minutes, death in 10-15
minutes.
12800 ppm
Death in 1-3 minutes.
10 Application "Smart Life - Smart Living"
Some functions include:
■
Push notifications: Mobile app alerts when the alarm is triggered.
10.1 Download application
TM
Compatible Android
and iOS apps are available from their respective app stores.
Search for "Smart Life - Smart Living".
10.2 Product to app pairing
Automatic pairing (EZ mode)
To automatically pair the product to the app.
Preconditions:
a
The TUYA mobile app "Smart Life - Smart Living" is installed on your mobile device.
a
Your mobile device is near the product.
a
Bluetooth and app access to location services are enabled on your mobile device.
a
Your mobile device is connected to the Wi-Fi network that the detector should be connec-
ted to.
a
The product is in normal operation. See:
1. Press and hold the TEST button for approximately 5 seconds to open the product for
pairing with the app (EZ Mode).
à
The LED will flash quickly and "PAr" will show on the display.
2. Open the mobile app, the product will automatically show up. Follow the onscreen in-
structions to complete the setup process.
à
You can now control the product using the app.
Manual pairing (AP mode)
Use this method if you fail to link your device to the app using EZ mode.
Preconditions:
a
The TUYA mobile app "Smart Life - Smart Living" is installed on your mobile device.
a
Your mobile device is near the product.
a
Bluetooth and app access to location services are enabled on your mobile device.
a
Your mobile device is connected to the Wi-Fi network that the detector should be connec-
ted to.
a
The product is in normal operation. See:
1. Open the app and select: + → Add Device → Add Manually → Sensors → CO Alarm
→ CO Detector (Wi-Fi).
2. Press and hold the TEST button for approximately 5 seconds to open the product for
pairing with the app (EZ Mode).
à
The LED will flash red quickly and "PAr" will show on the display.
3. Press and hold the TEST button for approximately 5 seconds to enter AP mode.
à
The LED will flash red slowly and "PAr" will show on the display.
4. Follow the onscreen instructions to complete the setup process.
à
You can now control the product using the app.
Cleaning and
Product status
[} 7].
Product status
[} 7].
Advertenties
Inhoudsopgave
