Advertenties
4
58
58
man_DD808 ('24) V2.indd 58
man_DD808 ('24) V2.indd 58
3.
Press the DEHUMIDIFICATION button to set the humidity:
CO 40% 45% 50% 55% 60% 65% 70% 75% 80%, CO stands for
continuous dehumidification.
4.
1 Press the MODE button to set the mode to 1(Low)-2(Medium)-3(High)-Auto.
2 If the appliance operates in fan mode only, press the button to set the fan level
to 1(Low)-2(Medium)-3(High).
3 When the appliance works continuously for 360hr, the display will show the P3
code to remind the user to clean the filter. Then press the button for 3 sec to
clean the P3 code, then the P3 code will disappear and the display will show the
current ambient temperature level.
5.
Press the SWING button to turn the swing function on/off
6.
Press the FAN button to turn the fan function on/off.
When the appliance is in fan function, the user can press the SPEED button to set
the fan speed to 1(low)-2(medium)-3(high).
7.
Beep on/off button:
When the appliance is operating, press the SWING and TIMER button for 3 sec to
turn the beep on or off.
8.
Humidity level indicator:
The LED-indicator is in the front casing of the appliance:
When the humidity≤59%, the indicator lights green;
When the humidity is ≥60%, the lights illuminate orange;
When the humidity is ≥70%, the lights illuminate red.
WATER TANK FULL ALERT
When the appliance's water tank is full, a signal will be emitted for 10 times and the
water-full indicator light will come on. The appliance will then stop working immediately.
Make sure the water tank is emptied and placed back into the appliance correctly. The
appliance will then resume operating in its last set mode.
MEMORY FUNCTION
(1) When the appliance is switched off and it is then in standby mode, it will remember
the last setting and it will start up when the appliance is switched on again.
(2) If the power fails while the appliance is switched on, the appliance will also remember
the last setting for when the power is switched on again.
(3) When the child lock and timer are set, the appliance switches off when the time has
elapsed. At that time, the appliance will not remember the child lock for when it is set
again, it will have to be reactivated.
SYNC MOTOR FAILURE
When Sync motor failure, the appliance will show C4. The Main motor, Sync motor and
hot air motor will stop working after 10mins.
10-10-2024 16:30
10-10-2024 16:30
Advertenties
