Advertenties
TFA_No. 60.2041_Anleitung
Digital alarm clock with pen holder
1. Delivery contents
• Digital alarm clock
• Instruction manual
• USB cable
2. Range of application and all the benefits of your new
instrument at a glance
• Pen holder with invisible display
• LED digits with 3 brightness levels and automatic brightness
adjustment (with USB/mains connection)
• Display of time, date or indoor temperature
• Alarm clock function
• Touch or clap-activated display (in pure battery operation)
3. For your safety
• This product is exclusively intended for the range of application
described above. It should only be used as described within
these instructions.
• Unauthorised repairs, alterations or changes to the product are
prohibited.
Caution!
Risk of electrocution!
• Connect the device via the USB cable only to a suitable USB
power source such as a computer, USB power adapter.
• The device and the USB cable must not come into contact with
water or moisture. Suitable for indoor use only.
• Do not use the device if the housing or the USB cable are dam-
aged.
• Operate the device out of reach of persons (including children)
who cannot fully appreciate the potential risks of handling elec-
trical equipment.
• Unplug the device if any fault occurs or if the device is not used
for a long period of time.
• Route the USB cable lead so that it does not come into contact
with sharp-edged or hot objects.
Caution!
Risk of injury!
• Keep this device and the batteries out of reach of children.
• Small parts can be swallowed by children (under three years
old).
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious internal
burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
16
05.06.2024
10:39 Uhr
Seite 9
Digital alarm clock with pen holder
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Make sure the polarities are correct.
Never use a combination of old and new batteries together, nor
batteries of different types. Remove the batteries if the device
will not be used for an extended period of time. Avoid contact
with skin, eyes and mucous membranes when handling leaking
batteries. In case of contact, immediately rinse the affected
areas with water and consult a doctor..
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations
or shocks.
4. Elements
A: Display (Fig. 1):
A 1:
Time/date/indoor temperature/alarm time
A 2:
Alarm symbol
B: Buttons (Fig. 2):
B 1:
DOWN button
B 2:
UP button
B 3:
SET button
B 4:
ALARM switch
C: Housing (Fig. 2):
C 1:
Battery compartment CR2032
C 2:
Battery compartment 3 x 1,5 V AAA
C 3:
Battery compartment cover
C 4:
Inner battery compartment cover
C 5:
USB-C port
5. Getting started
• Remove the printed protective film. The display is initially invi-
sible.
• The alarm clock can be operated with the 3 x 1,5 V AAA batter-
ies (not included) or with USB/mains connection (USB cable
included).
• For a permanently illuminated display use the supplied USB
cable. In pure battery operation, permanent lighting is not pos-
sible (see "Display light").
• The CR2032 button cell (included) is a back-up battery to keep
the clock operational in the event of a blackout or other power
failure.
• Open the alarm clock's battery compartment.
17
Advertenties
