Inhoudsopgave
Advertenties
3
Installation
B
Please remember that the
manufacturer shall not be held liable if
the information given in the user guide
is not observed.
Points to be considered
when re-transporting your
refrigerator
1. Your refrigerator must be emptied and
cleaned prior to any transportation.
2. Shelves, accessories, and etc. have to
be fastened securely by adhesive tape
against any jolt before repackaging.
3. Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on the
package must be followed.
Please do not forget...
That recycled material is an
indispensable source for the nature
and for our national resources.
If you would like to contribute to the
recycling of the packaging materials,
you can get further information from
the environmental bodies or local
authorities.
Before operating your
refrigerator
Before starting to use your refrigerator
check the following:
1. The interior of the refrigerator has to
be dry and it is possible for the air
to circulate freely at the back of the
appliance.
All manuals and user guides at all-guides.com
2. Clean the interior of the refrigerator as
3. Plug the refrigerator into the wall
4. You will hear a noise as the
5. Front edges of the refrigerator may
spacersSpacersthe interior light in the
The front
Electric connection
socket which is being protected by a
fuse with the appropriate capacity.
Important:
• The connection must bein
• The power cable plug must be easily
• Extension cords and connector must
B
7
EN
recommended in the "Maintenance
and cleaning" section.
outlet. When the fridge door is open
the fridge compartment interior light
will come on.
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
even if the compressor is not running
and this is quite normal.
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.
refrigerator compartment will be
switched on.
Connect your product to a grounded
accordance with with national
regulations.
accessible after installation.
not be used for connection.
A damaged power cable must be
replaced by a qualified electrician.
Advertenties
Hoofdstukken
Inhoudsopgave
