Inhoudsopgave
Advertenties
Interior Lighting Brightness
▪ Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER
key twice.
▪ Use the UP and DOWN keys to select the brightness of the interior lighting when the door is close.
When the door is open, the interior lighting returns to its normal level.
L0: off when the door is close or open
L1: dimmest setting
L2: medium setting
L3: brightest setting (default)
▪ Touch and hold the UP key for 5 seconds to confirm the selection.
Fan Mode
▪ Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the
POWER key three (3) times.
▪ Use the UP and DOWN keys to select the fan mode.
F0: Silent mode - Energy saving mode (default)
F1: DynaClima mode - half time
F2: DynaClima mode - full time
▪ Touch and hold the UP key for 5 seconds to confirm the selection.
Audible Tones
▪ Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch
the POWER key four (4) times.
▪ Use the UP and DOWN keys to select the audible tones.
S0: sensor tone ON, alarm tone OFF
S1: sensor tone ON, alarm tone ON (default)
S2: sensor tone OFF, alarm tone OFF
S3: sensor tone OFF, alarm tone ON
▪ Touch and hold the UP key for 5 seconds to confirm the selection.
TEMPERAT URE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit remembers the previous
temperature settings. When the power is recovered, the cabinet temperature will go back the same
setting temperature as before the power interruption.
TEMPERATURE ALARM
An audible alarm will sound if the temperature in one of the zones rises or falls outside the temperature
range. The relevant temperature display will flash at the same time. The temperature the appliance is
set at determines the temperature the appliance recognizes as being too warm or too cool. The
audible alarm will sound and the temperature display will flash:
-
When you switch the appliance on, if the temperature inside the appliance is very different from
temperature set.
-
When there has been a lengthy interruption to the power supply.
-
When too many items have been put into the unit at one time. Or too much ambient air flowed
when rearranging and removing storage items.
-
When the door is not been closed tightly.
-
The appliance is faulty.
The audible alarm will be automatically silenced and the temperature display stops flashing when the
temperature is reached again. However, if the noise disturbs you, you can switch the audible alarm
off before this if you wish by pressing the POWER key once. The alarm will stop. The
relevanttemperature display continues to flash until the set temperature has been reached. The
display then lights up constantly, and the alarm system is fully active again.
the
in
set
EN-134
Advertenties
Hoofdstukken
Inhoudsopgave
