Inhoudsopgave
Advertenties
*Date code 201811475B or later
**Date code 201536 or later
EnGLIsh
Batteries
Cat #
V
Ah
DC
DCB546
18/54
6.0/2.0
DCB547
18/54
9.0/3.0
DCB548
18/54
12.0/4.0
DCB181
18
1.5
DCB182
18
4.0
DCB183/B
18
2.0
DCB184/B
18
5.0
DCB185
18
1.3
DCB187
18
3.0
DCB189
18
4.0
*Date code 201811475B or later
**Date code 201536 or later
Do not wash worklight or charger with water or allow
•
water to get inside light or charger. Do not submerge light
in water at any time.
While worklight is in use, do not cover with cloth or
•
other flammable materials due to increased risk of fire.
•
Store the worklight indoors when not in use.
•
Do not contact hot parts.
•
To reduce the risk of injury, only D
accessories should be used with this product.
WARNING: Do not place the worklight in a position
which may cause anyone to intentionally or
unintentionally stare into the light. Serious eye injury
could result.
WARNING: This worklight is in excess of the Exempt
Group (acc. EN62471) and the viewer related risk due to
retinal blue light is dependent upon how the users use
the worklight. A Safety Hazard Distance of more than 2 m
should be kept.
CAUTION: When not in use, place worklight on its
side on a stable surface where it will not cause a
tripping or falling hazard. Some tools with large battery
packs will stand upright on the battery pack but may be
easily knocked over.
Residual Risks
•
The following risks are inherent to the use of this appliance:
-
impaired vision when looking directly into light
-
burns from touching a hot surface
Chargers
D
WALT chargers require no adjustment and are designed to be
e
as easy as possible to operate.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of your mains.
20
Weight (kg) DCB104
DCB107 DCB112 DCB113 DCB115
1.05
60
270
1.46
75*
420
1.44
120
540
0.35
22
70
0.61
60/40**
185
0.40
30
90
0.62
75/50**
240
0.35
22
60
0.54
45
140
0.54
60
185
WALT recommended
e
Chargers/Charge Times (Minutes)
DCB116
170
140
90
80
270
220
135*
110*
350
300
180
150
45
35
22
22
120
100
60
60/45** 60/40** 60/40**
60
50
30
30
150
120
75
75/60** 75/50** 75/50**
40
30
22
22
90
70
45
45
120
100
60
60
i
Your D
WALT charger is double insulated in
e
accordance with EN60335; therefore no earth wire
is required.
If the supply cord is damaged, it must be replaced only by
D
WALT or an authorised service organisation.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal in the plug.
•
Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1 mm
is 30 m.
When using a cable reel, always unwind the cable completely.
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains important
safety and operating instructions for compatible battery
chargers (refer to Technical Data).
•
Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.
WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.
WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
DCB117
DCB118 DCB132 DCB119
40
60
90
X
60
75*
135*
X
80
120
180
X
22
22
22
45
60
120
30
30
30
60
75
150
22
22
22
X
45
45
45
90
60
60
60
120
; the maximum length
2
Advertenties
Inhoudsopgave
