Inhoudsopgave
Advertenties
Do not operate machine before having read
the operating instructions, understood all the
notes and assembly the machine as
described here.
Keep the instructions in a safe place for future use.
Contents
EC Declaration of Conformity
No. (S-No.): 10749
according to EC directive: 2006/42/EC
We,
ATIKA GmbH
Josef-Drexler-Str. 8 - 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Tischkreissäge (Circular Saw Bench)
model T 250 ECO / type RTS 250 M
Serial number: 000001-0200000
is conform with the above mentioned EC directives as well as with
the provisions of the guidelines below:
2004/108/EC and 2011/65/EU.
Following harmonized standards have been applied:
EN 61029-1:2009/ A11 :2010; EN 61029-2-1:2012;
EN 55014-1:2006+A1+A2; EN 61000-3-2:2006+A1+A2;
EN 61000-3-3:2008, EN 55014-2:1997+A1+A2
Duly authorised person for the complilation of technical
documents:
ATIKA GmbH - Technical department -
Josef-Drexler-Str. 8 - 89331 Burgau - Germany
i. A.
Burgau, 29.09.2015
i.A. G. Koppenstein,
Engineering design management
All manuals and user guides at all-guides.com
1
17
17
17
18
18
18
19
20
21
21
23
24
25
25
25
25
26
84
89
Extent of delivery
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
• Circular saw T 250 ECO including
− Power cable and plug
− TCT saw blade ∅ 250
− Splitting wedge
• Supporting leg (4x)
• Connection strut - short (2x)
• Connection strut - long (2x)
• Leg (2x)
• Safety guard with exhaust outlet
• Longitudinal stop
• Table length extension
• Pushstick
• Extraction hose
• screw bag
• 2 spanners for replacing saw blade
• Operating manual
Characteristic data of noise
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of the machine as a bench to circular saw with standard
circular saw blade.
Noise power level
No-load
L
= 99.5 dB(A)
WA
Load
L
= 111.1 dB(A)
WA
The factor of measurement uncertainty is 3 dB.
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although there is
a relationship between emission and immersion levels, it can be
reliably deduced whether additional precautionary measures are
necessary or not. Factors, which can influence the immersion level
currently existing at the workplace include the duration of the effects,
the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible
workplace values can also vary from country to country. This
information should however enable an improved assessment of the
danger and risk to be carried out.
Sound pressure level at
the workplace
L
= 87.3 dB(A)
pA
L
= 99.2 dB(A)
pA
17
Advertenties
Hoofdstukken
Inhoudsopgave
