Inhoudsopgave
Advertenties
DE
1.
Before assembling, ensure that you are assembling the appliance in a place
that is level and dry.
EN
2.
Remove all packaging materials and transport safeguards. Keep the
packaging material, such as plastic bags or Styrofoam away from small
FR
children - danger of suffocation!
NL
3.
Check whether all needed parts are present.
4.
Insert the motor with stand tube into the housing and ensure that both parts
IT
are properly connected. The black locking screw (15) can only be properly
screwed in through the opening in the stand tube if both parts are properly
ES
connected.
PL
5.
Turn the base upside down so that you are looking at the underside of the
base. Screw the 5 provided rollers into the corresponding 5 holes. Then turn
the base right-side-up.
6.
There is a threaded ring on the underside of the housing. Unscrew the
threaded ring from the housing. Insert the housing into the aperture of the
base and firmly screw the threaded ring onto the underside of the base.
7.
Now place the appliance right-side-up and proceed with the assembly pro-
cess:
8.
Remove the nut (6) from the motor axle by unscrewing it counterclockwise.
(8/9).
9.
Fasten the rear basket cover on the motor housing, by fixing the cover in
place with the nut (6) (Fig. 1). In this process do not press too forcefully. In
this process pay attention to the apertures/pins.
10. Place the impeller on the axle on the motor. Fix the impeller in place with
the fastening ring (4) (turn counter-clockwise). Check whether the fan
blades move freely. Note: The fastening ring tightens itself, therefore do not
use excessive force when fastening (Fig. 2)
24 von 96
Copyright UNOLD AG | www.unold.de
Fig. 1
Stand 12.12.2024
Advertenties
Inhoudsopgave
