Advertenties
Mowing system
43
On the mowing deck, there is a connection for a ½" water
hose coupling.
The mowing system can be cleaned by connecting a water
hose.
During the cleaning process, the grass box or a suitable
accessory must be fitted.
1. Lower the mowing deck to the lowest cutting height.
2. Start the engine - set a medium engine speed.
3. Switch the mowing appliance on.
4. Connect the hose to the connection and turn the water
on.
After a few minutes, the mowing system has been
cleaned.
5. Leave the mowing system to run for a few more minutes
in order to spin the water out.
6. Clean the grass box and leave to dry.
MAINTENANCE AND SERVICE
Maintenance, service and cleaning work may only be carried out when the machine has been turned off and has cooled down
and the ignition key has been removed.
The following tasks may be carried out by the user himself. All the other maintenance, service and upkeep tasks must be carried
out by a qualified service agent.
Check level of engine oil
Change engine oil
Clean the air filter
Replace the air filter
Check the spark plug
Check the brake
Check the tyre pressure
Check mowing blade
Check for loose parts
Check drive belt
Clean the lawn tractor
Clean air intake grille on engine
Clean grass and cuttings from transmission
For hydrostat drive:
Clean ventilator for transmission cooling
Lubrication plan
page GB 19
In cases of high load and high temperatures, shorter maintenance intervals than those stated in the table may be necessary.
All manuals and user guides at all-guides.com
GB
Before each
After each use
use
GB 18
Checking by a qualified service agent is
necessary:
-
after impact with an obstacle
-
if the V-belt is defective
-
if the engine comes to an immediate standstill
-
if the brake performance drops
-
if the blade is bent (do not straighten)
-
if the drive belt slips
-
if the blade shaft is bent (do not straighten)
-
if there is a defect in the blade holder
-
if there is damage to the transmission.
After 25 hours
After the first 5
of operation
hours
)* see operating instructions of the engine manufacturer
After 50 hours
Before each
of operation
storage
Advertenties
