Advertenties
3.3.2.1. WEIGHING
Not weigh goods over the max capacity. Once overload (weight window displays
consecutive sound, please remove the goods immediately to avoid unexpected damage.
3.3.2.2. ENTERING THE UNIT PRICE
Input the unit price with ten number keys from 0 to 9 before or after loading. The interval between one number
and the next of the same unit price should not be more than about six seconds (if over six seconds, the system
will clear the previous value automatically). If the weight window displays a negative value (eg. Negative tare
weight), the amount window will display "
"
", it indicates that the accumulation sum is over 9999.99 (EUR).
3.3.2.3. TARE
When weighing bulk goods, put the container on the scale pan, then press key [
window to displays "
and the weight window will display the net weight. Note: tare weight + net weight < max capacity.
3.3.2.4. SAVING, CHANGING THE UNIT PRICE
Saving: first input the unit price you want to save by choosing ten digit keys from 0 to 9, then press key [
and then press key [
] (x=1~3), the unit price will be saved (the original unit price saved in the key [
be replaced by the new one).
3.3.2.5. ADDING
For example:
Goods A, 1.500kg, EUR 5.00/kg;
•
Goods B, 0.700kg, EUR 8.00/kg;
•
Please operate as follows:
1. Put the goods A on the scale pan, the weight window will display "
" (EUR/kg), the amount window will display "
2. Press the key [
mode. The weight window will display "
3. Remove the goods A and wait for the scale to returns back to the weighing mode.
4. Put goods B on the scale pan, the weight window will display "
" (EUR/kg), and the amount window will display "
5. Press the key [
mode. The weight window will display "
window will display "
times.
3.3.2.6. CLEARING
Under the adding mode, press key [
will be out which indicates that the scale is not in adding status. Under non-adding mode, if you input the wrong
unit price, press key [
3.3.2.7. ZERO
", indicating that the scale is ready for weighing. Put the goods into the container,
], and the adding indicator lamp will light up to indicate the scale is under adding
], and the adding indicator lamp will light up to indicate the scale is under adding
" (EUR). You can continue the adding operation as the above steps up to 99
], the unit price window will display "
] and input the correct unit price.
EN
", which indicates no amount. If the amount window displays
" (EUR).
", and the amount window will display "
" (EUR).
", the unit price window will display "
), and the buzzer gives
] and wait for the weight
" (kg). Input the unit price "
" (EUR).
" (kg), then input the unit price "
", and the amount
", and then adding indicator lamp
],
] will
Advertenties
