Advertenties
3.2.1. ASSEMBLING
1. Place the device on a flat/horizontal surface. Adjust the height of the 4 feet at the bottom of the device
by turning them clockwise or counterclockwise. Check with the leveling vial that the device is level.
2. Unlock the bar lock, set the fastening bar in the vertical position, and engage the lock.
3. Screw the control panel to the fastening rod with the four screws.
3.2.2. CONNECTING THE DEVICE TO THE POWER SUPPLY:
1. Connect the power cable, the "AC" light on the display panel lights up.
2. Turn the switch to the selected position:
" " - power supply using the built-in battery,
•
" " – "off" position, device switched off;
•
3. After starting the device, the "UNIT PRICE" display will show the power supply voltage.
3.3 DEVICE USE
3.3.1. SYMBOL AND AUXILIARY DISPLAY
3.3.1.1. WEIGHT WINDOW
Zero position indicator lamp: at the left upper side of the weight window. It lights up to indicate that the scale is
at the zero position.
Tare indicator lamp: at the left bottom of the weight window. It lights up to indicate that the tare weight is
cleared away.
3.3.1.2. UNIT PRICE WINDOW
Under adding mode (the weight displays "
example, it displays "
" for the first time of adding an operation, and so on.
AC indicator lamp: it lights up to indicate that AC is applied. If it doesn't light up when using AC, it indicates that
the power supply is not well connected. Please check the power cord, socket, and fuse.
3.3.1.3. AMOUNT WINDOW
Adding indicator lamp: at the bottom of the amount window. It lights up to indicate that the scale has entered
into adding mode. Apart from displaying weight and unit price, it also has functions as shown in the table below:
Display
(Alarm)
(Alarm)
3.3.2. GENERAL SCALE OPERATION AND KEYPAD OPERATION
EN
"), the unit price window will display the adding times. For
Meaning
Under adding mode
Voltage is lower than 3.5 ± 0.1V
Overload
Description
Normal
Charge immediately
Remove goods immediately
Advertenties
