Inhoudsopgave
Advertenties
d) Replace Master remote control
Another remote control can of course be programmed as the "Master" remote control should the
"Master" remote control be lost or become faulty.
• Disassemble the door lock actuator from the door (remove two hex socket head screws with
the included Allen key and remove from the fastening element).
• Press the „Unlocked" button for approx. 2 seconds.
• „X" appears on the display, the symbols for radio reception and "Unlock" flash.
• Turn the handwheel approx. 10 revolutions towards "Lock".
• Storage place "1" will be shown in the display (no selection of another storage place is possib-
le!).
• Press a desired key in the new "Master" remote control for approx. 1 second.
• "OK" is shown in the display.
+
Please Note:
If the new "Master" remote control has already been programmed to another storage
place, this will automatically be released / deleted.
• Now carry out a completely new initialisation of the door lock actuator after assembling the
actuator as shown in chapter 10.
69
Advertenties
Hoofdstukken
Inhoudsopgave
