Inhoudsopgave
Advertenties
Press the "Départ différé" button, its corresponding indicator illuminates in blue, the LCD display turns on
and indicates the "Current time" and "Auto-start time", then press the "ON/OFF button to activate the
"Départ différé" function. To exit from the "Départ différé" working mode, press any button except the
"ON/OFF" button or "
Note: Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Note: the appliance is equipped with a power base which can be rotated 360
Function
BOIL WATER
Open the kettle lid and fill the kettle with appropriate amount of water, then close the lid.
Put the kettle body on the power base, connect with the power source, the "Brewing temperature" shown
in the LCD display is 100°C, and the "Brewing time" is 0:00. Set the temperature using the arrows on the
left of the LCD screen. After finishing setting, press "ON/OFF" button, the appliance starts to work, the
indicator of "ON/OFF" button illuminates in blue.
When the temperature reaches the selected temperature, a beep could be heard, the appliance will
stop working, the indicator of "ON/OFF" button will turn off and the LCD display will extinguish after 15
seconds, then the appliance enters into standby mode. (before the water boiled, if you press on/off
button again, the electric kettle stops working)
BREW TEA
Open the kettle lid and add some tea leaves into the brewing and fill kettle with appropriate amount of
water, then close the lid.
Put the kettle body on the power base, connect with the power source.
1.
Press the "Tea" button to select your desired type of tea. If you are not using the predefined setting
press the "Temperature setting buttons" to set the brewing temperature, and the LCD display will
indicate the set brewing temperature.
2. Press the "Durée" button to select your desired tea strength, when setting the strength of tea, the LCD
display will indicate the set brewing time.
3. Finally, press "ON/OFF" button, the appliance starts to boil water and the indicator of "ON/OFF" button
illuminates in blue. When the temperature reaches the set temperature, the brewing basket will go
down into the water for brewing the tea, and the brewing time will start to count down. When the
brewing time is "0:00", the brewing basket will go up automatically, three long beeps can be heard,
the appliance will stop working, the indicator of "ON/OFF" button will turn off and the LCD display will
extinguish after 15 seconds, then the appliance will enter into standby mode. (During working, if you
press On/off button again, the electric kettle stop working)
AUTO-START FUNCTION
After choosing your brew type (water or tea according to the explanation above), hold and press the
"Départ différé" button for 3 seconds: its corresponding indicator illuminates in blue, and the LCD display
indicates the "Current time" and "Auto-start time".
Press the "arrow buttons" on the left side of the LCD screen to set current time, and press the "arrow
buttons" on the right side of the LCD screen to set the auto-start time. A.M. are the hours from midnight
to noon, P.M. are the hours from noon to midnight. The time cycle is 12H, not 24H
Then press the "ON/OFF" button to enter into the auto-start working mode. At that time, the indicator of
the "ON/OFF" button illuminates in blue; the LCD display lights solidly. The current time starts to count up
until it reaches the auto-start time, then the tea-brewing function is activated and the appliance will
enter into standby mode after finish brewing.
KEEP WARM
" button.
www.livoo.fr
°.
Advertenties
Inhoudsopgave
