Download Print deze pagina

Connections; Use; Operation - Giostyle SHIVER30 Handleiding

12/230v

Advertenties

• Do not pour any liquid or ice into the inner box.
• Never place the appliance in water.
• Protect the device and all wires from heat and humidity.
• To avoid overheating or malfunction, ensure the plug fi ts into the vehicle cigarette-lighter socket to make proper
electrical contact.
• Do not touch the metal end of the plug after use, as it may be very hot and cause burns.
3

CONNECTIONS

• Connection to 12Vdc cigarette lighter socket
- Pull out or connect the 12Vdc cable to the device lid (as a function of the model)
- Plug the car plug (fi g.1) into the cigarette lighter socket
• Connection to AC 230Vac household power supply mains (in models provided with this option)
- Connect the 230Vac cable to the coolbox lid
- Plug the power cable (fi g.2) into the alternating current socket
Caution!
Ensure you ALWAYS plug in the power cable from the correct side.
Caution!
For models where a dual power supply mode is provided: NEVER connect the 12 Vdc and the 230 Vac cables at the same
time.
4

USE

• For health-related reasons, always clean the appliance inside and outside with a wet cloth any time you use the coolbox.
• Always store previously cooled food and drinks in the coolbox.
• Let warm food cool down before storing them in the coolbox.
• Connect the device on a stable base.
• The coolbox must be opened as little as possible, and it must be reclosed in the shortest time so that a constant temperature
can be held inside.
• The special insulation allows food and drinks to remain fresh for a long time even when the coolbox is off. To maximize and
extend the cooling effect over time, we suggest you use the ice packs (see ACCESSORIES).
• Caution!
In cases when medications need to be cooled, please ensure the device has a cooling power rating that suits the
requirements of all medications (see table of performance).
• Caution!
The device is suitable to keep cool food and drinks in their original packaging.
Never use the product for more than 36 hours of continuous operation.
Prolonged and continuous use may reduce performance or even damage the cooling system.
Once the coolbox is off, wait at least 2 hours before turning it on again.
• Caution!
After a long period of operation, water may form and accumulate at the bottom of the coolbox. This is normal, as air
humidity condenses during the cooling process. This means the coolbox is not broken.
If necessary, remove excess humidity with a wet cloth.
• Caution!
The cooling is produced by a Peltier cooling system that does not contain CFC or coolants.
5

OPERATION

• Once connected to the power source, the coolbox soon starts operating. The electrobox is designed to cool down
food and keep it fresh.
• Switch off the coolbox by simply disconnecting the power cable.
• The coolbox performance values are listed in the tables referring to the various product types (see section:
TESTS). In these tables, each external temperature value matches an average internal temperature value. This
data refers to an empty coolbox, after 180 minutes of operation, and may vary above or below 1.5°C.
6

Advertenties

loading