Advertenties
the obstacle is removed and the product
accidentally starts.
To stop the product
The product stops automatically if you do not operate it
for 10 minutes. Never let the product stay out of view
with the motor started. Stop the motor, turn the safety
key to 0 and remove the battery. Make sure that the
detatcher equipment does not rotate.
1. Release the motor brake handle to stop the motor.
(Fig. 37)
Introduction
WARNING:
maintenance, you must read and
understand the safety chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not
a service agent, speak to them for information about the
nearest service agent.
S 138i
Do a general inspection.
Clean the product.
Examine the dethatcher equipment.
Make sure that the safety devices on the product are not damaged. *
Examine the covers. *
Do a check of the motor brake handle. *
Do a check of the start inhibitor. *
Make sure that the ON/OFF button operates correctly and is not damaged.
Examine the battery for damage.
Do a check of the battery charge.
Make sure that the release buttons on the battery operates correctly and that the
battery locks into the product.
Examine the battery charger for damage and make sure that it operates correct-
ly.
Examine the connections between the battery and the product. Also examine the
connection between the battery and the battery charger.
To do a general inspection
•
Make sure that the nuts and screws on the product
are tightened.
937 - 009 - 27.09.2024
Maintenance
Before you do
2. Press the ON/OFF button (A) on the control panel
and the green LED (B) goes out. (Fig. 33)
3. Open the battery lid and turn the safety key to 0.
(Fig. 38)
4. To remove the battery, press the 2 release buttons
at the same time and pull out the battery. (Fig. 39)
5. Charge the battery if it is weak. For more
To charge the battery on page 14 .
information, see
For more detailed information, refer to
www.husqvarna.com.
Maintenance schedule
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
For maintenance identified with *, refer to
on the product on page 11 .
Each use
•
Make sure that the cables on the product are not in a
position where they can get damaged.
Safety devices
Each
Monthly
season
X
X
X
X
X
X
X
X
X
X
X
X
X
15
Advertenties
Hoofdstukken
Probleemoplossen
