Inhoudsopgave
Advertenties
34
Noises
5.
Remove with a tool the cover (e), un-
screw the lower hinge pivot (f) using a
10 mm spanner and re-screw it on the
opposite side.
6.
Install the cover (e) on the opposite side.
7.
Install the top door on the pin (G). Insert
the pivot of the middle hinge (H) into
the hole of the top door. Make sure that
the plastic space is placed under the
hinge. Install the bottom door on the
lower hinge pivot (f). Slightly tilting the
doors insert the pivot of the middle
hinge (H) into the hole of the bottom
door.
8.
Keeping the doors open, tighten the middle hinge with two screws.
9.
Unscrew the handle. Remove the plug
with a punch. Install the handle and the
plug on opposite side. Take from the ac-
cessory bag the two plugs and cover the
holes left open after having removed
the handle.
10. Make sure that the front board of the
door is parallel to the front board of the
top.
11. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
e
2
1
f
4
5
3
Advertenties
Hoofdstukken
Inhoudsopgave
