GB
Scope of delivery
•
Operation and Safety Notes
•
Shredder unit
•
Chassis
•
Collector box
•
Two running wheels and two adjustable
feet with assembly material
•
Spanner
•
Allen key
•
Instruction Manual
Assembling the shredder
C
1.
Assemble the two running wheels
(13).
2.
Clip in the wheel covers (14) into
the running wheels (13).
3.
Screw on the two adjustable feet
(12) to the chassis (9).
4.
Fix the cutting attachment (5) onto
the chassis (9) with the four screws
enclosed.
5.
To insert the collection box
(11), the safety switch must be un-
locked, i.e. in the "OFF" position.
6.
Push the collecting box (11) into the
chassis (9), with the safety switch
(10) on the side of the wheels (13).
The collecting box (11) can be
pushed in only in one direction.
7.
Lock the collector box (11) by push-
ing the safety switch (10) to the ON
position.
78
All manuals and user guides at all-guides.com
Operation
Start-up
Before starting the shredder, make sure
that the shredder unit is firmly attached to
the chassis and the collector box and safety
switch are in their proper positions.
The shredder cannot be switched on
before the collector box and safety
switch are in their proper positions.
Switching the shredder on and off
Make sure that the mains power vol-
tage agrees with the type plate on the
shredder.
Make a loop at the end of the
extension cable and hang the
loop onto the strain relief on the
mains cable (
Connect the extension cable.
Make sure that the funnel feeder is empty.
1. To switch on, push the operating mode
selection switch (
turn the operating mode selection switch
to the right.
The operating mode selection switch
locks into place.
2
1
Place your chopping material in the fill hopper.
The material is drawn in and chopped.
2. To switch off, turn the operating mode se-
lection switch (
6).
A
A
2) lock forward and
2) back to the left.
A