Inhoudsopgave
Advertenties
SilverCrest SLL 10 B1
speakers on again. The playback controls
(2) work on both speakers.
•
Start the playback on your Bluetooth
9.3.2 Deactivate TWS mode
•
Briefly press
beep, the TWS LED (7) will switch off on both speakers.
•
Playback will now continue on the left speaker only.
•
You can reactivate TWS mode by briefly pressing the
on the right speaker.
9.4 AUX IN mode
You can listen to music from a portable audio device connected to the
3.5 mm jack cable (C).
Use the supplied 3.5 mm jack cable (C) for AUX IN mode.
Once a 3.5 mm jack plug is inserted into the AUX IN jack (9)
of the speaker, it will automatically switch to the AUX IN
input. At this point, any active Bluetooth
interrupted and playback will continue via the AUX IN input.
Tracks cannot be skipped using the
in AUX IN mode.
The speaker will switch off automatically after 10 minutes if
no signal is received in AUX IN mode for 10 minutes.
•
Switch off the speaker and open the cover (10).
•
Connect the audio device to the AUX IN jack of the speaker. Use
the supplied 3.5 mm jack cable (C).
20 - English
(6) on any speaker to disable TWS mode. After a
(4),
®
device.
®
connection will be
(3) and
(3) and
(6) button
(2) buttons
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
