Inhoudsopgave
Advertenties
9.2 Pair with a Bluetooth
The AUX IN socket (9) must not be used during the coupling
process.
The Bluetooth
Enter '0000' if you are asked for a PIN during the pairing
process. The connection may take a long time to establish,
depending on the device used.
•
Set your Bluetooth
available Bluetooth
instructions of your Bluetooth
•
Briefly press the on/off button
power/charging LED (12) will flash brightly twice, a series of beeps
will sound and then the power/charge LED (12) will flash blue
rapidly. Coupling mode is now active.
•
Select device SLL 10 B1 from the list of found devices to pair the
two devices. A series of beeps will sound and the power/charge
LED (12) will flash blue twice every 3 seconds once the connection
is successful.
•
Now, start playback on your Bluetooth
the connected speaker.
•
Hold down the on/off button
end the Bluetooth connection
power/charge LED (12) will flash twice and then switch off.
®
device
®
device name of the speaker is SLL 10 B1.
®
device, such as your smartphone, to search for
®
devices nearby. Please consult the operating
®
device.
(1) for approximately 3 seconds to
®
. A beep will sound and the
SilverCrest SLL 10 B1
(1) to switch the speaker on. The
®
device. Playback occurs via
English - 17
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
