Advertenties
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or
burners.
While boiling and frying big quantities of food without a lid, big humidity. After 6 minutes the appli‐
ance returns to previous setting.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
The control Panel is a sensor field. To
operate the hood touch the symbol
exactly in the middle for at least 1
second.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
The hoods light works independently to
other hood functions. To illuminate the
cooking surface touch
To turn off the appliance press the
again.
5.2 Activating Maximum Motor
Speed
When you touch
Speed starts to operate for 6 minutes. After
that time, the appliance returns to its previous
speed settings.
When the function is turned on, additional
touch on
does not have any effects.
.
symbol
, the Maximum Motor
5.3 Filter notification
Filter alarm reminds to change or clean the
charcoal filter and clean the grease filter. The
filter indicator
seconds if the grease filter must be cleaned.
The filter indicator
seconds if the charcoal filter must be
replaced or cleaned.
Refer to cleaning the grease filter in care
and cleaning chapter.
Refer to cleaning the charcoal filter or
replacing the charcoal filter in care and
cleaning chapter.
To reset the function touch
To activate or deactivate function:
1. Switch on the control panel. Make sure
that the panel is on.
2. To activate function touch
seconds.
If the function is activated, the filter icon
flashes (red) five times.
3. To deactivate function touch
seconds.
If the function is deactivated, the filter icon
turns on (red) for 4 seconds.
64
is turned on (red) for 30
flashes (red) for 30
for 3 seconds.
for 3
for 3
Advertenties
