Inhoudsopgave
Advertenties
DE
7.
Switch on the appliance by pressing the switch on lower side of the kettle
downward. If the kettle is not correctly seated the appliance cannot be
EN
switched on.
8.
Whenever you take the kettle off the base, the appliance is automatically
FR
switched off, even if the water is not yet boiling.
NL
9.
The kettle automatically stops heating at the latest when the water boils.
10. ATTENTION:
IT
The automatic switch-off only works, if the lid is correctly closed.
ES
11. Of course you may also push the switch into the „O"-position to interrupt
heating.
PL
12. Press the button at the top of the handle to pour out water. The vacuum in
the kettle will be released and the water can be poured out.
13. Note: Thanks to the vacuum between the inner and outer wall of the kettle
water that has been brought to boil in the container will stay hot longer (for
approx. 6 hours at 55 °C).
17. Always use fresh and cold water. Do not leave water in the kettle.
18. Switch off and unplug electrical appliances after use.
Boiling water can cause scalding. Therefore, please
handle the appliance with care when it contains hot
water.
The appliance becomes very hot during operation
and maintains the heat during some time after
disconnection.
20 von 64
Copyright UNOLD AG | www.unold.de
14. CAUTION!
Ensure that the kettle is switched off before removing
it from the base.
15. Please allow the product to cool down for a
certain time before using the kettle again to heat
water.
16. The kettle is fitted with a dry-operation cutout
that switches off the heating elements when they
become too hot, for instance when the kettle has
boiled dry. Allow the kettle to cool down. Then fill
the kettle with cold water. This will reset the cutout
so that the kettle can be used again.
Stand 17.10.2022
Advertenties
Inhoudsopgave
