Inhoudsopgave
Advertenties
GB
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
(domestic connection) of a maximum of
0.265 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
If necessary, the local power supply com-
pany can be asked for the system imped-
ance.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety Information
This equipment may cause serious injury
in the case of improper use. In order to
avoid injury to people and damage to prop-
erty, the following safety information must
be observed and users must familiarise
themselves with all operating parts.
44
All manuals and user guides at all-guides.com
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instructions
carefully.
Risk of injury from parts being
thrown up.
Any persons in the vicinity must
be kept out of the danger zone.
Caution! Avoid injury from rotat-
ing turbine. Keep hands, feet and
clothing away.
Attention! Shut off motor before
unclogging discharge chute.
Wear eye and ear protection.
Achtung! Caution! Disconnect the
power lead if the mains cable is
damaged. Do not touch mains ca-
ble.
Ejector chute slewing
range
Noise level specification
L
in dB.
wa
Working width
Protection class II
Do not dispose of electrical equip-
ment in domestic waste.
Advertenties
Hoofdstukken
Inhoudsopgave
