CLEANING AND MAINTENANCE
Switch off and unplug the appliance from the mains socket before cleaning.
To maximise the efficiency of the appliance clean it regularly.
Cleaning the housing
Clean the housing with a slight damp cloth.
Never use chemical or abrasive cleaning agents.
Cleaning the filters
The air conditioner is equipped with two screen filters to
remove dust particles:
A filter in the upper air inlet.
A filter in the lower air inlet.
The filters are part of the filter holders.
Remove the upper filter.
Unscrew two screws on the lower filter and then remove the
lower filter.
The filters should be cleaned regularly. Use a vacuum cleaner
or tap the filters lightly to remove loose dust and dirt from the
filters and then rinse thoroughly under running water. Dry
thoroughly before replacing.
NOTE: Never use the air conditioner without the filters.
Storage
Drain any water in the appliance before
completely operating the appliance on fan only
mode for a few hours, to thoroughly dry the
inside.
Clean the filters.
Store the power cord as shown.
Remove the batteries from the remote control.
Place the appliance in a dry place.
EN-16