Reset the Monoblock recirculation indication
When you replace the monoblock filters after clean-
ing, press the [+] and [-] buttons simultaneously for 5
seconds to reset the cleaning indicator.
If you do not do this, the green light will continue to
shine when you turn on the extraction hood.
4.3 Maintenance of of the cookerhood
Use a soft, wet cloth and a mild detergent to clean
the hood. Then rub dry with a dry, soft cloth to avoid
stains.
Never use aggressive, abrasive detergents or
sponges.
Do not use an abrasive or scourer.
If the lower plate is to be removed from the
extractor for cleaning, proceed as follows:
• Open the lower plate.
• Click the damper loose from the lower plate,
but TAKE CARE not to let go of the lower pla-
te!
• Tilt the lower plate gently down and hold
onto it gently.
• Once the lower plate is hanging down it can
be unhooked from the hinges.
For rehooking the lower plate, simply do the
same in reverse order. Take care not to let go of
the lower plate.
4.4 Technical problem
In the event of a malfunction, you can contact your
(kitchen) supplier and/or the Novy Customer Service
Department. In order for the Customer Service
Department to reply quickly and precisely you must to
tell them which type of extraction hood you have.
The model number can be found on a sticker on
the interior of the extraction hood.
This is visible as soon as you take the filter out
of the extraction hood.
You can write down the model number here:
Model number: ............................
EN 17