Inhoudsopgave
Advertenties
d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e)Keep proper standing poses and balance at all times. This enables better control of the power
tool in unexpected situations.
f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g)If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a)Do not force the power tool. Use the correct power tool for your application. The adaptable
power tools will work better and more safely at the designed speed.
b)Do not use the power tool if they cannot be turned on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c)Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. It is dangerous for untrained
users to use these tools.
e)Maintain power tools. Check for misalignment or binding of moving parts. Breakage and any
other condition of the parts may affect the power tool's operation. If it is damaged, please
repair the power tool before use. Many accidents are caused by poor maintenance of power
tools.
f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g)Use the power tool, accessories, tool bits and so on in accordance with the instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) Service
a)Ask qualified maintenance personnel to use the same parts to repair and replace power
tools. This will ensure that the safety of the power tool is well maintained.
b)Caution!
If the power cord needs to be replaced, it must be replaced by the manufacturer or its agent to
avoid safety risks.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to the noise can cause hearing loss.
Use the auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
Please hold power tools by its insulated gripping surface, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory
04
Advertenties
Inhoudsopgave
