Inhoudsopgave
Advertenties
Care and cleaning
Clean the housing only with a damp cloth. Do not uses any solvents! Dry thoroughly afterwards.
If the surrounding temperature is low or the tool has not been used for a long time, please turn on
the tool to preheat for a period of time under no load. This allows the lubricant to circulate. Drilling
is difficult without enough warm-up.
Tool lubrication
CAUTION:
THE MACHINE IS SUPPLIED SOME OIL WHEN U GET THE NEW MACHINE!
The new machine can run for 20-30h.
Oil level indicates the oil status. Adding 20-30g oil each time can help the machine run for 20-30h.
Half the oil displayed in the oil hole window indicates that the machine is filled with oil and users
should check oil window daily. Add too much oil will cause the machine not work. If you add too
much oil, please pour it out.
The user must check the remaining oil regularly and replenish it as necessary according to the
instructions.
It is recommended to re-lubricate tools after each time you change the brushes.
Type of oil: It is recommended to lubricate tools with Hydraulic oil type ISOVG46.
Send the tool to a service centre for lubrication. However, if circumstances allow you to carry out
this operation yourself, proceed as follows:
1. Operate the tool for a few minutes to warm it up.
2. Switch off the tool and disconnect it from the socket.
3. Using the wrench (I) to unscrew the port (G) and be careful not to lose or damage the seals.
4. Fill oil tank.
5. Refit the cover on housing and secure it.
STORAGE
Keep the machine, operating instructions and accessories if necessary in the original package. In
this way, you will always have all the information and parts ready. Properly pack the equipment or
use the original packaging to avoid transportation damage.
Always keep the machine in dry place.
Please do not store the machine in a place with a higher temperature, as the oil in the housing
may leak. After the machine has been used, it should be stored flat. Do not store in the vertical
direction.
TROUBLESHOOTING INSTRUCTIONS
09
Advertenties
Inhoudsopgave
