Inhoudsopgave
Advertenties
EN
FIELD OF APPLICATION
1
This sprayer has been manufactured with fi rst quality materials and exclusively designed to be used with agricultural phytosanitary
products and garden products (herbicides, insecticides, fungicides).
2
SETTING UP AND SPRAYING
It is advisable to perform the setting up verifi cation procedure with water:
1) Attach the hose (703) to the lance (892) and the chamber (672) (995). Fit the straps (see drawing detail). Check that all items are
properly screwed on so as to avoid possible leaks of the product to be sprayed.
2) Remove the cap and pour the liquid to be sprayed. Use the fi lter.
3) Put the sprayer on the back and adjust the straps.
4) Operate the lever about 8-10 times to pressurize, then pull the handle (358) and adjust the nozzle (100) to obtain the desired
spray. The use of a pressure regulator is recommended.
5) This sprayer can be used with the right or left hand. To operate it the other way round: remove the hook lance (953); turn the lever 180º
and using a screwdriver, remove the bushing (338) from the base; placing the lever and the straps in the opposite side of the tank.
3
MAINTENANCE
1) After each use depressurize the pressure chamber.
2) Clean the tank and other components (nozzle, fi lter...) with water.
3) In the event of obstruction of the nozzle or fi lter, clean them with water and do not use metallic objects.
4) In order to extend the working life of the joints, regularly apply a few drops of oil or grease on the moving parts.
5) In the event of a jammed handle (358) and/or a dirty fi lter (346), release the grip (357). Remove the fi lter by pulling it out, clean
it, lubricate the joints and assemble.
6) To proceed with the replacement due to wear and tear of the chamber seal (133) (497): disassemble the hook lance (953) and
remove the chamber (672) (995); upon removing the chamber the agitator will drop to the bottom of the tank. Proceed to remove
it. Unscrew the valve (365) using the crosspiece of the agitator. Do not lose the ball. Replace the seal (133) (497) and proceed to
assemble the valve and chamber upside down. Make sure that the ball is in its place.
7) To proceed with the replacement due to wear and tear of the cylinder (092): disassemble the hook lance (953), remove the
chamber. Insert your hand and unscrew the cylinder. Screw the new cylinder by hand until it tightens (see drawing detail).
8) Store the sprayer indoors protected from frost and fi erce heat (between 5º and 30º C).
4
SECURITY REGULATIONS
1) Do not use chemical products out of the indicated application fi eld
2) Always respect the instructions and dosage, on the packaging labels, that the manufacturer recommends for the treatment
product that you will be using.
3) Do not eat, drink or smoke during the preparation and the treatment.
4) Do not use the spray on persons, animals, or electric installations.
5) Do not use the treatment when there is strong wind or extreme heat.
6) In case of intoxication, consult your doctor and provide him/her with the package of the treatment product.
7) Do not dump product or cleaning residues near courses of water, wells, etc. that are going to be used for human or animal
consumption.
8) Use proper protection equipment, masks, glasses, gloves, shoes, etc.
9) Do not modify the sprayer. Do not use the device if it is damaged, deformed or if its original shape has been altered.
10) Store the sprayer indoors protected from frost and fi erce heat (between 5º and 30º C).
GUARANTEE
5
Our goods are guaranteed for three years from the user's purchase date against all manufacture or material fl aws. The warranty is
strictly limited to free replacement of parts that our services consider defective. The warranty shall not apply in case of improper
use of our materials, disassembly and/or alterations performed to our devices, and to those parts of normal wear and tear that
require maintenance. The warranty shall not apply in case of negligence, imprudence and irrational use of the material. Dispatch and
transportation costs of parts under warranty as well as workmanship that were not performed in our factory shall be borne by the
user. To invoke this warranty, send us the faulty part, carriage free, together with the receipt or the purchasing invoice.
6
GOIZPER RECOMMENDS REGULATOR USE
Use the pressure regulator to obtain an optimum spraying ensuring an effective treatment for each crop, a moderate consumption of
water and phytosanitary product so as to respect nearby crops and be environmentally friendly.
The use of the pressure regulator that Goizper has fi tted as a standard feature in the sprayer you have just purchased, ensures a
constant exit pressure and uniform droplet size.
This accessory, designed and only patented by Goizper, allows to tailor the equipment to the type of treatment to be performed:
-
For insecticide and fungicide treatments use the high pressure application (3 bar-green indicator-ON position) to obtain smaller droplets.
The combination of a suitable cone or hollow cone nozzle will provide a more effective droplet size and fl ow rate in each case.
-
For herbicide treatments use the low pressure application (1.5 bar-red indicator-ON position), to obtain thicker droplets and to prevent
drift and the risk to contaminate adjacent crops. Use the defl ective or fan nozzle which maximises the effi ciency of the treatment.
-
The OFF position ensures the free fl ow of liquid and allows the depressurization of the accessory.
Advertenties
Inhoudsopgave
