Inhoudsopgave
Advertenties
EN
The distance between the remote and the projector should not exceed 10 m / 33 ft.
T
2. Position Your Projector
Place the projector on a stable, flat surface in front of the projection surface. For the best results, the projection surface
should be white and flat.
T
• It is unnecessary to tilt the projector towards the projection surface. You can correct the projection image with the built-
in autofocus and auto-keystone correction.
• The distance between the projector and the projection surface determines the projection image size. For the best result,
position the projector 0.8-4.0 m / 2.62-13.12 ft away from the projection surface to get a screen size of 30-150 inches.
Screen Size
30 inches
50 inches
80 inches
100 inches
120 inches
150 inches
3. Power On / Off
Press the power button for 3 seconds to turn on the projector or access the power-off menu.
T
• You can also press the power button on the remote for 3 seconds to access the power-off menu.
• When powered on, press the power button on the remote to switch to standby mode.
• In HDMI Source Mode, the projector will switch to standby mode after 10 minutes of button inactivity or when no signal is detected.
• When standby mode lasts for 30 minutes, the projector will automatically power off.
4. Auto Image Correction
Auto image correction includes autofocus, auto keystone correction, and auto screen fit.
06
Distance Between Projector Lens and Screen
0.8 m / 2.62 ft
1.33 m / 4.36 ft
2.1 m / 6.89 ft
2.65 m / 8.69 ft
3.2 m / 10.5 ft
4.0 m /13.12 ft
3s
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
