Advertenties
FreshJet3000
Display message
AA
4
➤ Use the
button to select the desired fan speed.
✔ The roof air conditioner confirms the receipt of the values with a high note.
✔ The new fan speed is set.
7.7
Setting the temperature
Cooling Mode
In the "Automatic" (
specify a temperature between 16 °C and 30 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✔ The roof air conditioner confirms the receipt of the values with a high note.
✔ The temperature is set on the roof air conditioner.
Heating Mode
In the "Automatic" (
between 16 °C and 30 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✔ The roof air conditioner confirms the receipt of the values with a high note.
✔ The temperature is set on the roof air conditioner.
7.8
Adjusting the air nozzles
The air supply within the vehicle can be regulated by setting the air nozzles.
➤ Turn the slats (fig. 5 1, page 4) in the air nozzles independently in the required
directions. The air flow can be adjusted along the ceiling or towards the floor.
EN
Explanation
Auto fan (changes the fan speed based on the temperature setting
and actual room temperature)
only available in the "Cooling" (
" (
)
"Ventilation
modes.
Turbo fan speed, only when
only available in the "Cooling" (
), "Cooling" (
), and "Dehumidifying" (
) and "Heating" (
Operating the roof air conditioner
), "Heating" (
TURBO
button is pressed
) and "Heating" (
) modes, you can specify a temperature
) and
) modes.
) modes, you can
19
Advertenties
