Advertenties
FreshJet3000
• make the settings
• select additional functions
You can use the remote control to
• switch the roof air conditioner to and from standby mode.
• switch the ambient lights on and off
• make the settings
• select additional functions
7.2
Using the remote control
The remote control must be pointed at the IR receiver (fig. 4 1, page 4) on the
control panel during operation.
➤ Press a button.
✔ The value is transmitted directly to the roof air conditioner.
✔ The roof air conditioner confirms the receipt of data with a high note.
Switching only the remote control to or from standby
In standby mode, the remote control display is inactive.
If the remote control is not pointing to the IR receiver on the control panel, you can
activate the remote control or switch it to standby independently from the roof air
conditioner:
➤ Press the
button.
7.3
Hints for improved use
The following hints will optimise the performance of your roof air conditioner:
• Improve the heat insulation of your vehicle by sealing gaps and hanging reflective
blinds or curtains on your windows.
• If the vehicle has been subjected to direct sunlight for a long time: Operate the
roof air conditioner in the "Ventilation" (
while before switching on the "Cooling" (
• Avoid opening doors and windows as far as possible in the "Cooling" (
mode.
• Align the air nozzles sensibly.
EN
Operating the roof air conditioner
) mode with the windows open for a
) air conditioning mode.
)
17
Advertenties
