Sony SU-WL450 Installatiehandleiding pagina 9
Verberg thumbnails
Zie ook voor SU-WL450:
- Installatie-instructie (665 pagina's) ,
- Gebruiksaanwijzing (104 pagina's) ,
- Installatiehandleiding (614 pagina's)
Advertenties
Preparing for the installation
of the TV
Refer to the Setup Guide for stand installation.
KD-85/75XG95
1
Mark the installation location on
the wall.
Use masking tape, etc. (not supplied) to
mark the location of the TV near the
Base or Base Adaptor. Refer to the
following table.
Screen centre point
Length for
marking
Model Name
KD-85XG95 1,910 644 200
KD-75XG95 1,674 425 200
2
Remove the screws from the
rear of the TV.
(1,000)
(300)
Masking tape
Unit: mm
Screen
centre
dimension
211
60
− 9 (GB) −
3
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
5.
Note
Firmly secure the Attachment parts using screws.
When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Be sure to store the used or unused parts in a safe
place for future use. Retain this manual for future
reference.
Standard mounting (2-a)
Belt
Screw (+PSW 6 x 50)
Slim mounting (2-b)
Belt
Screw (+PSW 6 x 20)
4
Connect the necessary cable(s)
to the TV.
Make sure to connect the cables before
installing the TV on the wall. You will be
unable to connect the cables when the TV
is installed.
Refer to the Reference Guide supplied with
your TV.
Note
Subcontract the cable routing in the wall to a licensed
contractor.
Bundle the connecting cables to prevent stepping on
them before wall mounting.
Pulley
Screw
(+PSW 6 x 20)
Spacer
(60 mm)
GB
Pulley
Spacer (20 mm)
Advertenties
