Download Print deze pagina

Connecting The Wifi Module To The Internet - Eldom Invest RH W W Series Handleiding Voor Installatie En Aansluiting

Elektrische wandconvector met elektronische aansturing en wifi-module met internet afstandsbediening en monitoringsysteem

Advertenties

EN
WARNING! Connecting the convector heater to the Internet is optional and is not specifically required for the operation of the
convector heater as intended!
WARNING! These instructions form an integral part of the manual which provides information on the operation of your
convector heater with electronic control.
WARNING! The availability of a WiFi module in the electronic control of the convector heater is designated in the model number:
џ
„RHxxWxxW-x" / „RHxxNW" - the convector heater has a WiFi module

CONNECTING THE WIFI MODULE TO THE INTERNET

Terms used in this Manual:
џ
„module" – the WiFi module of the electronic thermoregulator (electronic control) of your convector heater.
„regulator" – the electronic thermoregulator (electronic control) of your convector heater.
џ
„device" - a smartphone, tablet or laptop, which is used to connect the WiFi module to the Internet and to enable its remote control
џ
and monitoring.
„WiFi network" – the wireless network (WiFi) created by the module.
џ
„network" – the wireless network (WiFi) to which you want to connect the module. It is created by a router/modem, must have
џ
internet access and be near the unit.
„system" – the Eldom web-based remote control and monitoring system.
џ
ATTENTION! The module is connected to the regulator and is controlled by it!
ATTENTION! You must connect the module to the Internet to enable the remote control and monitoring of the unit operation!
ATTENTION! You need a device to connect the module to the system.
ATTENTION! You need to download the Eldom application on your device from Google Play or Аpp Store. Make sure your device
supports the current version of the app.
ATTENTION! You need to have a registration (account) in the Eldom application in order to control and monitor the operation of your
convector heater.
The module is connected to the Internet in 3 main steps. Subsequent remote control and monitoring of
unit operation is implemented through the system.
STEP 1. CREATING A WIFI NETWORK BY THE MODULE
џ In the New WiFi Network menu select mode AP On, the sign appears on the regulator display (
STEP 2. CONNECTING THE DEVICE TO THE MODULE
џ Disable the internet connection of the device.
Enable the GPS location service of the device.
џ
Activate the WiFi module of the device and connect it with the network created by the module
џ
(ELD-....).
џ The password is: Incotex123
If the device does not find the WiFi network created by the module, please repeat step 1 or restart the WiFi module on the
џ
device (turn it off and on again).
If the device and module are connected successfully, the screen of the regulator will display the Internet connection symbol (
џ
STEP 3. CONNECTING THE MODULE TO THE INTERNET, THROUGH THE DEVICE.
џ Start the Eldom application. Set the preferred language.
џ Select the Local option
џ Select Add New Device. A confirmation may be required to use the device location from the application. Permit the use.
џ Select the appliance detected and confirm your selection with OK.
џ The screen of the regulator will display a connection message. Press the OK button.
џ The screen of the device will display the unit found. Select it.
џ From the Syst.sett. menu of the application select Network Settings.
џ In the "For connection via the Internet" section enter the network name/password. Make sure your network is at 2.4 Ghz.
џ Save the entry. The screen of the device will display a brief message that the network is stored.
џ Cut the connection between the module and device. Disable the WiFi on the device, connect it to another network or switch over to
mobile data.
џ In the New WiFi Network menu of the regulator, select mode WiFi On., the sign appears on the regulator display (
After these steps are implemented, your convector heater is connected to the Eldom remote control and
monitoring system (
) .The bar reports WiFi signal strength.Subsequent control and monitoring of unit
operation is carried out by application option via the Internet.
It is possible for the "Added New Device" to be controlled by several devices at the same time, as long as
the Eldom application is installed on them, and the application uses the same registered user (account -
username and password).
3
).
).
EN
) .

Advertenties

loading

Deze handleiding is ook geschikt voor:

Rh nw series