6.
Connection voltage and frequency, as given on the device, must correspond to that of
the socket to be used and the electrical installation must be equipped with an earth
leakage circuit breaker of 30 mA . The electrical socket that you are using must be to
hand at all times in order to be able to remove the plug from the socket in the event
of an emergency.
7.
To avoid overloading and/or fuses being blown, do not use any other equipment on
the same socket or electrical group as the one used for the device.
8.
Unroll the electric cable for the device fully before inserting the plug into the socket
and ensure that the electrical cable does not come into contact with the fireplace or
get hot. Do not run the electrical cable under carpet, cover with mats, runners or
similar and do not place in areas that are walked on frequently. Ensure that it cannot
be stepped on and that no furniture is placed on top of it. Do not bend the electrical
cable around sharp corners and do not roll up too tightly after use! Prevent the
electrical cable coming into contact with oil, solvents and sharp objects. Check the
cable and plug regularly for damage. Do not bend or pinch the electrical cable and do
not wind it around the device; this could damage the insulation!
9.
The use of an extension cable is not advised as this can lead to overheating and fire. If
the use of an extension cable is unavoidable, make sure that it is not damaged and
that it is an approved extension cable with a minimum diameter of 2x1,0 mm² and a
minimum permitted capacity of 500 Watt. Always fully extend the cable in order to
prevent overheating.
10. Only connect the device to a fixed socket. Do not use multi-plug adapters or similar.
11. Only connect the device to a fixed socket. Do not use multi-plug adapters or similar.
12. During use, the plug may begin to feel warm; this is normal. If it's really warm, there
may be something wrong with the socket. Please contact your electrician.
13. Always turn off the device and remove the plug from the power socket: Never turn
the device off using the plug!
14. Prevent foreign objects entering the radiation/ventilation or outlet openings on the
device. This may cause electric shock, fire or damage.
15. Never leave a working device unattended but switch off and then remove the plug
from the socket.
16. Apart from manual use, this device can also be operated via a timer. However you
operate it, make sure that the safety guidelines are taken into account at all times!
Do not operate the device with an additional time clock, timer, volume control or any
other device that automatically turns on the device.
17. Always unplug the device when it is not in use!
18. This device gets hot during use. Never touch the device when it is on or shortly
thereafter; it could burn you.
19. This device is not equipped to monitor the ambient temperature in the room. Do not
use the device in small rooms if these rooms are used by persons who are not
capable of leaving the room independently, unless there is constant supervision.
20. Never operate the device with wet hands.
19