Advertenties
5. Operation
5.1 Transporting the device
• The handle 7 can be folded up for transport.
• When the water tank 16 is filled, transport the device carefully.
5.2 Setting up the device
DANGER! Risk of electric shock due to moisture!
If you want to use the device 6 with water: Do not plug the power unit 9 into a
wall socket until the device 6 is in its place and the water tank 16 is filled.
• Place the mini air cooler 6 on a level surface where the device can stand securely
and cannot be accidentally knocked down.
• Choose a place...
... with sufficient clearance around the device 6.
... at table height (e.g. on a desk or a chest of drawers) for optimum air circula-
tion.
... near the place you want cooled.
5.3 Filling the water tank
Basic functioning of the mini air cooler 6: the filter 15 takes the water in from the water
tank 16. Air is passed through the filter 15. The air is cooled by the evaporation of
the water.
You can also use the device 6 without water. It then operates as a fan without the de-
scribed cooling effect.
1. Figure A: push down on the release button 2 and remove the front panel 14.
2. Figure B: pull the water tank 16 with the filter 15 out of the device 6.
3. Figure C: rotate the filter 15 on the water tank 16 anticlockwise until the
marking
on the filter points to the marking
move the filter upwards.
4. Fill the water tank 16 at most up to the MAX marking (700 ml).
Use cold, fresh tap water without additives.
Unlock on the water tank. Re-
9
GB
Advertenties
