Advertenties
Operating range
•
In normal mode:
•
Outdoors: up to 330 metres/
1000 feet
•
Indoors: up to 50 metres/150 feet
•
In ECO mode:
•
Outdoors: up to 260 metres/
850 feet
•
The operating range varies depending on
the surroundings and other factors that
cause interference. For interference from
wet and moist materials, the range loss
is up to 100%. For interference from dry
materials, see the following table:
Dry materials
Material
thickness
Wood, plaster,
< 30 cm/12 in
cardboard, glass
(without metal,
wires, or lead)
Brick, plywood
< 30 cm/12 in
Reinforced
< 30 cm/12 in
concrete
Metal grilles or
< 1 cm/0.4 in
bars
Metal or
< 1 cm/0.4 in
aluminium sheets
Change the microphone
sensitivity
You can change the microphone sensitivity of
the baby unit. There are five levels.
1
Press sensitivity repeatedly on the parent
unit.
»
The sound level lights illuminate briefly
and indicate the current sensitivity
settings on the baby unit.
10
EN
All manuals and user guides at all-guides.com
Loss of
range
0-10%
5-35%
30-100%
90-100%
100%
ECO mode
When you monitor your baby from a small
distance, you can enable ECO mode. In ECO
mode, the baby monitor consumes less energy,
but still ensures that you can hear your baby
clearly without any distracting noise. For the
operating range in ECO mode, see Section
"Operating range".
Note
•
Make sure that the parent unit is linked to the
baby unit.
1
To enable ECO mode, press and hold
on the parent unit for two seconds.
»
The ECO mode indicator lights up
blue and the parent unit reboots.
2
To disable ECO mode, press and hold
for two seconds.
»
The ECO mode indicator goes out
and the parent unit reboots.
Reset the baby monitor
To reset the parent unit:
1
Press and hold
to turn off the parent
unit.
2
Press and hold
3
When you hold
unit.
»
The parent unit is reset.
To reset the baby unit:
1
Follow the same procedure as you reset
the parent unit.
on the parent unit.
, turn on the parent
Advertenties
