Advertenties
D1
Fig. 7 – Appliance dimensions
Only connect the mains plug (7) to a properly installed
and freely accessible socket if the water supply and
outlet have been connected correctly (see next sec-
tion).
7.2. Fitt ing suction cups
Fig. 8 – Fitting suction cups
Screw the suction cup (25) to the suction cup attach-
ment (9) using the screw (24) to ensure secure posi-
tioning.
7.3. Water connection
NOTICE!
Damage to the appliance!
If the appliance is connected improperly, there is a risk of
damage to the appliance.
The hose must be free of kinks and connected careful-
ly.
If the water pipes are new or have not been used for
a long time, run the water to ensure that the water is
clear and free of impurities. If this precaution is not tak-
en, there is a risk of the water inlet becoming blocked
and the appliance being damaged.
If the appliance is to replace an old appliance, never
use old hose sets for the connection. Connect the ap-
pliance with the new hose sets provided.
W
H
D2
Connect the appliance to a drinking water pipe up to
max. 60°C.
Only use the accessories supplied or accessories which
are described as suitable in this user manual.
When connecting to the drinking water, ensure that the
appliance is connected to a safety device to stop the
drinking water becoming contaminated by backflow
(in accordance with DIN EN 1717). We recommend hiring
a qualified specialist to perform the installation work,
including the water and electrical connections, and any
repair work.
If the water supply hose (22) supplied does not fit your tap,
you can buy adapters from your plumbing supply store.
Fig. 9 – Connecting the water hose
Connect the water supply hose (22) to a cold water tap
with a 3/4" thread (see Fig. 9).
Screw the hose connection hand tight.
The water hose is designed for a water pressure of approx.
10 bar. We recommend turning off the water supply after
use, especially if your house connection does not have a
pressure reducer.
7.4. Supplying water via the bucket
Leave the soft cover on the suction hose after
you have connected it to the dishwasher. If
you remove the soft cover, water will come
out.
Fig. 10 – Bucket hose connection
Instead of using water supply via a tap, you can also sup-
ply the appliance with water via the bucket hose connec-
tion (see Fig. 10).
DE
FR
NL
ES
IT
EN
69
Advertenties
