Inhoudsopgave
Advertenties
Step 4:
Attach the front post (5).
1.
Put onto the front post (5) the front post cover (20). Attach the front post
(5) to the front post mounting tube of main frame (62) and connect the
plug of connection cable (19) to the socket of the circuit cable (77).
2.
Insert the front post (5) to main frame (62) and secure, using allen head
bolts M8x16 (18), spring washers (13) and washers (16+17).
(Attention: Ensure that the cable loom are not crunched or pinched
during installation.)
Step 5:
Attach the handlebar (6) at handlebar support (5).
1.
Guide the preassembled handlebar unit (6) through the upper part of
the handlebar post (5), put the pulse cable (81) through the hole and
close the bracket of handlebar holder.
2.
Attach the front handlebar cover (15) at the handlebar holder of hand-
lebar support (5) and screw the handlebar (6) in desired position at the
handlebar post (5) and tighten firmly with spacer (59), spring washer
(13), washer (14) and handlebar screw (12).
Step 6:
Attach the computer (1) at handlebar support (5).
1.
Put the computer holder (2) onto the handlebar support (5) and attach
it with screws (4).
2.
Push the plug of the connecting cable (19) and pulse cable (81) into
the associated socket of the computer (1).
3.
Place the computer (1) on the computer holder (2) and attach it with
the screws (3).
17
Advertenties
Inhoudsopgave
