Inhoudsopgave
Advertenties
Using the appliance
Warning! Never cover the appliance during operation. This could
lead to heat accumulation or fi re and damage to your appliance.
Make sure no water can drop into the appliance.
120
EN
Switch On/O
Press ON/OFF button (E). The current
humidity level in the room shows in
the display (A).
Mode
Press MODE (G) to switch between
automatic and continuous dehumidi-
fi cation.
Setting humidity level
Ensure that the appliance is in Auto
mode. Press UP (B) or DOWN (H) to
set the desired humidity level. The
appliance will start to work until the
desired level is reached.
Fan speed
Press WIND (C) to switch between
highly e cient (hi-e cient) and
silent (Silence) fan speed.
Set timer
To run the dehumidifi er for a pre-
set amount of hours, press TIMER
(D)."0" blinks on the display. Set the
time you wish the appliance to oper-
ate between 1 and 24 hours.
Empty the container
If "Water full" lights up and the
display shows "FL", the water tank
needs to be emptied (see "Empty
the water tank") After reinstalling the
emptied water tank, the dehumidi-
fi er restarts automatically after three
minutes.
Placement guidelines
The dehumidifi er should be used in
≥ 40 cm
closed rooms for e cient work.
When operating the appliance,
keep doors, windows and other
openings closed.
Make sure to maintain distances of
40 cm upwards and 50 cm side-
≥ 50 cm
≥ 50 cm
swards for free air circulation
The dehumidifi er can support dry-
≥ 50 cm
ing laundry. Make sure to maintain
≥ 50 m
distances of ≥50 cm on all sides to
the wet laundry.
Do not operate the dehumidfi er
near dryers, heaters or radiators.
EN
121
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
