Inhoudsopgave
Advertenties
DK
FILTER MATERIAL
Either Filterballs or sand can be used
as a filter material.
Filterballs (Art. 1069): Besides a high filtration
capacity (down to 1 micron), Filterballs are
water-saving as you do not need to continuously
backwash. Instead, you can simply wash the
Filterballs in the washing machine (without soap),
or by hand, when the season is over. Compared
to other filter materials Filterballs have a minimal
water resistance, which gives a higher water flow.
This means that the filter system can circulate all
the pool water faster, which in turn means less
energy consumption. Another great advantage
is the light weight of the Filterballs. This is great
news for your back when it comes to emptying
the filter tank! 100g Filterballs are equivalent to an
entire 3.57 kg sand.
Filter sand (Art. 1760): Sand is historically the
most common filter material. And with good
reason. The natural material picks up particles
down to 40 micron. On the other hand, sand, and
especially wet sand, is mega heavy. Therefore,
it is recommended that the filter system is
located in its intended position before the tank
is filled with sand. Sand also requires ongoing
backwashing, a minimum of 2-4 times per month,
in order to clean the sand. This means that you
use more water when you choose sand as a filter
material. In a pool with 30-40,000 litres of water,
between 180 and 240 litres of water is used per
backwash.
Powerful pump and large filter tank
The system comes with a powerful pump that is
proportionate in capacity to the filter tank size and
the pool volume specified in the specifications
below. The pump must have enough power to
be able to circulate all the pool water 5 times
a day - through the filter material. As a general
rule, the cleaning capacity of the pump must as a
minimum be the pool water volume divided by 5.
The pump is suitable for use in salt water.
Fitting and hose connection
The system can be mounted directly on all pools
with a regular pump outlet, and is suitable for use
with standard hoses of Ø50 mm. Filter material
and hoses for pools are not included.
2
Specifications
Operation over pressure
Cord length including plug
Max. ambient temperature
Min. ambient temperature
Maximum pool size in litres
Pump power
Pumpe Flow Rate
Qmax l/min
Hmax m
Flow Rate Filtermateriale
Tank volumen
Volumen Filtermateriale
El-installation
Pressure gauge
Pre-filter
Filter tank size mm
Power
El-installation
Hose connection mm
Pump type
MV-1042-03-2022 . © Alle rettigheder forbeholdes Swim & Fun A/S
Sand
Filterballs
1.5 bar
1.5 metres
35 ºC
-4 ºC
60.000 liter
600 W
17.000 l/h
-
10
12.180 l/t
12.700 l/t
75 L
75 kg
2.100 g
Automatisk differential
switch (30 mA)
Yes
Yes
Ø 500
230V/50 Hz
Automatic differential
switch (30 mA)
Ø32/38/50
Self-priming
Advertenties
Hoofdstukken
Inhoudsopgave
