Inhoudsopgave
Advertenties
ENGLISH
f Remove the attachment comb (Fig. 4ⓑ) after every use
de
and lift the blade set out of the housing (Fig. 5ⓐ). Use the
cleaning brush to remove any cut hairs from the housing
en
opening and from the blade set (Fig. 6). The cleaning lever
can also be pressed. This allows the cut hairs that accumu-
fr
late between the bottom blade and the top blade to be eas-
ily removed using the cleaning brush(EASY CLEANING).
f Always keep the appliance socket (D) clean.
it
f Only wipe the appliance with a soft, slightly damp cloth.
f Clean the blade set using the hygienic spray.
es
f Oil the blade set with the blade set oil (Fig. 7).
pt
f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently.
nl
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
da
set should be replaced.
sv
Changing the blade set
1. Switch the appliance off using the on/off switch (Fig. 3ⓑ)
no
and disconnect from the power supply.
2. Slide the blade set off the housing in the direction of the
fi
arrow (Fig. 5ⓐ). Remove the blade set.
3. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 5ⓑ).
tr
pl
Problem elimination
cs
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
sk
f Clean and oil the blade set (Fig. 6/7); if this does not
resolve the problem, replace the blade set (Fig. 5).
hr
Skin injury
hu
Cause: Too much pressure on the skin.
f Reduce pressure when cutting close to skin.
sl
Cause: Cutting angle is too steep.
f Hold appliance flatter to the skin.
ro
Cause: Damaged blade set.
bg
f Check whether the blade edges were damaged during use
and replace the blade set if necessary.
ru
Battery operating time is too short.
uk
Cause: Blade set and housing opening are dirty.
f Clean and oil the blade set (Fig. 6/7).
et
Cause: Battery is worn out.
lv
f Have the battery replaced at a service centre.
lt
Charging indicator light does not light up.
Cause: Charging contact/appliance socket is dirty.
el
f Clean appliance socket (D).
ar
10
Cause: Defective power supply.
f Ensure that the plug-in transformer is plugged into the
mains socket.
f Check the mains cable for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to
repair the appliance yourself!
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.
Advertenties
Inhoudsopgave
