Inhoudsopgave
Advertenties
3.16 Activation of Filter Replacement Time Counter
By activating this function, you can get an alarm that indicates that a filter needs to be replaced after a specified
period of time. This is used only if you do not have pressure guards in the unit
Menu:
Configuration I Filter I Time counter activated
Configuration I Filter I Time counter activated
Parameter name
Setting range
Time counter
ON/OFF
activated
3.17 Period of Time for Filter Replacement
When this function is activated an alarm indicates a filter replacement after a given time period. Does not apply if a
pressure guard is fitted.
Menu:
Configuration I Filter I Period of time
Configuration I Filter I Period of time
Parameter name
Setting range
Period of time
0 - 12
3.18 Resetting the Time Counter
You have to reset the time after replacing a filter by using the clock for the filter alarm. Does not apply if a pressure
guard is fitted
Menu:
Configuration I Filter I Reset time counter
Configuration I Filter I Reset time counter
Parameter name
Setting range
Reset time counter
YES/NO
3.19 Resetting the alarm
Shows the last 5 alarms, active alarms and alarms which have been handled. Time of registration for alarm is also
shown.
Menu:
Test I Alarm I Reset
Test I Alarm I Reset
Parameter name
Setting range
Reset
NO/YES
All manuals and user guides at all-guides.com
Unit
Default value
OFF
Unit
Default value
Month
6
Unit
Default value
YES
Unit
Default value
NO
54
Advertenties
Hoofdstukken
Inhoudsopgave
