Inhoudsopgave
Advertenties
1.4
KHS Hygiene Flush Box
Using the KHS Hygiene Flush Box can ensure a high standard of
hygiene for a building's drinking water supply. The KHS Hygiene
Flush Box flushing ensures a regular flow through the drinking
water installation and prevents water stagnation in drinking water
installations.
Water exchange group
Function
The KHS Hygiene Flush Box is integrated into the drinking water in-
stallation that requires flushing via the water exchange groups and
connected to the waste water via the trap. The KHS Hygiene Flush
Box is operated via the control system.
Depending on the version, the KHS Hygiene Flush Box is equipped
with one or two water exchange groups, each of which can be
connected to a cold or hot water installation. Each water exchange
group can be shut off for maintenance purposes using the built-in
maintenance cut-offs. The combined flow and temperature sensor
(only for PRO and LITE) can provide information on the quantity
and temperature of the water flowing through during a flushing
cycle. The flushing cycles are triggered via the controller using a
solenoid valve.
The water exchange group is completed by a combination of
flow limiter, anti-pollution check valve and aerator. A flow limiter
and anti-pollution check valve are pre-assembled in the aerator,
limiting the flow to 10 l/min. Flow limiters for a flow rate of 5 l/min
or 15 l/min are not included in the scope of delivery, but can be
purchased and installed if required.
© www.kemper-group.com – 07.2024 / K410068903016-00 – 21 /108
Advertenties
Hoofdstukken
Inhoudsopgave
